Commercial EV Charging Station Distributor
A distributor's margin is not made on the unit price. It is made on lead time, spare parts, and the certification status of the model you are holding in stock. The distributor who shaved $80 per unit off a purchase and then wrote off a container because the model was not listed for their market did not make a margin — they financed a warehouse full of metal.
If you are building a charging business on resale rather than on projects, the decision is not "which supplier is cheapest". It is which of three commercial structures you are entering, because each one assigns certification cost, inventory risk, and customer ownership differently.
Three structures, three sets of terms
Read the fifth column first. Certification ownership is the line item that decides whether a stock position is an asset or a liability — everything else in the table is negotiable, that column is not.
| Structure |
Typical volume |
Lead time |
Indicative gross margin |
Who owns certification & liability |
| Spot buying, no agreement |
10–50 units |
7–12 weeks |
10–18% |
You do. You are the importer of record and the responsible party for market compliance |
| Authorized distribution |
100+ units per year, territory agreed |
8–14 weeks, priority allocation |
18–25% |
Shared. Manufacturer holds the listing; you hold local obligations |
| ODM with your own brand |
200–500 units per SKU per year |
12–19 weeks including tooling and artwork |
22–35% |
You, unless a private-label listing is negotiated — and it usually is not free |
The volume thresholds are the ones that actually appear in offers, and they exist because ODM tooling, artwork, firmware branding and re-certification are fixed costs. Below roughly 1,500–3,000 units a year across a product family, private-label manufacturing rarely pays back; above that, the margin gap to spot buying is large enough to fund the engineering.
The four questions that decide whether to sign
Most distributor agreements fail on the same four points. Ask them in writing before signing, not after the first container lands.
- Who owns the leads? If the manufacturer sells direct into your territory while you hold their stock, your margin is being competed away by your own supplier. Territorial exclusivity has to cover inbound enquiries from your market, not just the right to buy.
- What is the price-protection window? A 90-day protection clause is normal; none is a signal that a price drop will land on your inventory the week after you receive it.
- Which models are actually listed for my market? Listing is model-specific. A supplier whose certificate covers a 22 kW wallbox does not thereby have a listed 180 kW cabinet, and shipping the unlisted one shifts the compliance problem to you.
- Who carries the spare parts? Either you stock modules and connectors locally, or your customers wait weeks. That decision determines your service reputation and your inventory cash requirement — see the spare-policy discussion in station design and availability.
Corrections that save a container
Three patterns I have watched repeat across markets:
- Cheap stock is usually cheap because it is unlisted. A unit without a valid listing for your market cannot be legally energised in a public installation in most jurisdictions, and it cannot be used in incentive-funded projects. The saving is real until the first inspection.
- Firmware version is part of the product. Buying OCPP 1.6J stock that cannot be upgraded to 2.0.1 locks you out of Plug & Charge and several backend features. Confirm the upgrade path in writing, per model.
- Connector standard is not interchangeable at the margin. Type 1 stock in a Type 2 market does not convert; it discounts. Match the connector to the market before you commit volume, and check plug-mix decisions for DC lines.
For project-based buyers rather than stock-based ones, the earlier decision points are in commercial site planning. For factory-versus-trader screening — a different question from distributor screening — see sourcing from China.
What to get in the distribution agreement
- Territory defined by country and channel, with lead ownership stated explicitly.
- Model list attached as a schedule, each with its listing mark and report number.
- Price protection window and the notice period for changes.
- Spare-parts commitment: which parts, at what stock level, replenished on what lead time.
- Training: at least one factory session for your installers and one for your sales team.
- Marketing assets in your language, cleared for your market's claims rules.
- Warranty handling: who diagnoses, who pays labour, and where the unit goes.
- Termination terms including how remaining stock and open warranty claims are handled.
An agreement that does not attach the model schedule with report numbers is not a distribution agreement. It is a purchase order with warm language around it.